Daylight, Coolwhite and warmwhite are optional for different requirements on color temperature.
Use triplewire filament to ensure sufficient electron powder and prolong service life.
High lumen retaining rate and small light attenuation.
Lamps shall be installed in indoor and outdoor places with good ventilation, less dust, no corrosive gas and combustible and explosive materials around. The power supply voltage can fluctuate within the range of +20% to -20% of the rated voltage, and the out of range will affect the lighting technical parameters. The high voltage may burn down the electronic ballast.
When installing fluorescent lamp, the lamp operation manual should be read carefully, and the installation and fixing mode of lamps should be understood so as to make corresponding supporting installation measures in advance.
Before installing lamps, the lamps shall be connected before being powered on to confirm that the lamps will be on before installing them. In case of trouble caused by transportation or other reasons after installation, the lamp will not be on and then checked.
The power supply is not connected;
The filament of the lamp is burnt out (for electronic ballast).
Focus on providing mong pu solutions for 5 years.